Single monitor setup: Open the flap of the box to unpackage stand base and stand riser.
Note: Both stand base and stand riser will be detached when you first unpackage items. Once you have your stand base and stand riser you want to align and place the stand riser on the stand base then open the screw handle at the bottom of base and turn clockwise till stand is secure or until your here a click. Now you want to open the protective cover on the monitor to access the VESA slot on the monitor. Slide the tabs on your stand riser into the slots back of your monitor. Hold the stand riser and lift the monitor carefully, then place it on a flat surface. This will lock your monitor onto your stand riser. Now that your monitor is put together, find the cables inside box.
.png?version=1&modificationDate=1667960828367&cacheVersion=1&api=v2&width=544&height=280)
.png?version=1&modificationDate=1667960828213&cacheVersion=1&api=v2&width=573&height=255)
Your box should come with a (Power cord, DisplayPort aka DP cable or USB-B cable and USB-C cable)
Power cord
DisplayPort aka DP cable
USB A-B cable
USB C-C Cable
Click on image to enlarge
When setting up single monitor look for your ports, they all should be at the back of the monitor. Take your power cord and plug it into back of monitor on your left-hand side and plug the other end into surge protector or wall outlet. Next take your USB C-C cable and connect it from your laptop to your monitor.
Reminder: This is a single monitor setup, if you’re only connecting your laptop to your monitor those will be the only two cables you will need.
If you have a computer case, you may plug either your DP cable (and connect it to back of your monitor for Multi-Stream Transport (MST) Function)
(Note: Both Ends look exactly the same, so it doesn't matter which side you plug into the back of the monitor)
or your USB A-B cable into your monitor and connect it to your computer case.
Once all the necessary cables are connected to your monitor, press the power button back of monitor on right side to turn on if does not. watch for initial message about powering device. select yes so it will charge the laptop. Wired connection (ethernet cable) Goes into back of monitor. Verify mouse, KB and headset all work.
.png?version=1&modificationDate=1667960827132&cacheVersion=1&api=v2&width=544&height=262)
.png?version=1&modificationDate=1667960827000&cacheVersion=1&api=v2)
Click on image to enlarge
________________________________________________________________________________
Single set up with only Power cord and USB C-C
.png?version=1&modificationDate=1667960826871&cacheVersion=1&api=v2&width=340&height=141)
Click on image to enlarge
Once Monitors and cables are setup Properly: Select both windows logo key + P to get display options
Go to setting and under Systems → Select Display → Select Multiple Displays if your PC does not automatically detect the multiple Displays within the monitors.